$295.00 – $570.00
These charts are produced with a high-precision LVT film recording process for the best possible density range, low noise, and fine detail. We have multiple options available including Small (Half Sheet), Medium (Full Sheet), and Multi-Size (Full Sheet) targets.
Our Multi-Size option makes maximal use of the film space to provide a variety of different sized charts.
Description
These charts contain SFRplus test patterns with 4:1 contrast and grayscale and color patterns, produced with a high-precision LVT film recording process for the best possible density range, low noise, and fine detail. The Multi-Size versions contain 5 different sizes all printed on one sheet of film. The small and medium options are a single size, as indicated in the table below.
Video (Watch on our site)
| 5×7 Multi-Chart Dimensions | 5×9 Multi-Chart Dimensions | 5×7 Medium | 5×9 Medium | ||||
|---|---|---|---|---|---|---|---|
| Active Area | Bar-to-Bar Height |
Active Area | Bar-to-Bar Height |
Active Area | Bar-to-Bar Height |
Active Area | Bar-to-Bar Height |
| 197mm x 136mm (7.75″ x 5.357″) |
128mm (5.208″) |
235mm x 131mm (9.25″ x 5.139″) |
122.8mm (4.834″) |
229mm x 163.2mm (9.016″ x 6.425″) |
153.5mm (6.043″) |
235 mm x 130.5 mm (9.25″ x 5.139″) | 122.8 mm (4.835″) |
| 102mm x 70mm (4″ x 2.765″) |
66.1mm (2.601″) |
102mm x 56mm (4″ x 2.222″) |
53.1mm (2.090″) |
||||
| 64mm x 44mm (2.5″ x 1.728″) |
41.3mm (1.625″) |
76mm x 42mm (3″ x 1.667″) |
39.8mm (1.568″) |
5×7 Small | 5×9 Small | ||
| 51mm x 35mm (2″ x 1.328″) |
33mm (1.3″) |
51mm x 28mm (2″ x 1.111″) |
26.5mm (1.045″) |
Active Area | Bar-to-Bar Height |
Active Area | Bar-to-Bar Height |
| 38mm x 26mm (1.5″ x 1.027″) |
24.8mm (0.975″) |
38mm x 21mm (1.5″ x 0.833″) |
19.9mm (0.784″) |
160mm x 114.3mm (6.3″ x 4.5″) |
107.5mm (4.23″) |
196.9 mm x 109.4 mm (7.75″ x 4.306″) | 102.9 mm (4.051″) |
Documentation and software support
SFRplus can be run either through the highly-interactive Rescharts interface or as a batch-capable fixed module. The key documentation for getting started is Using SFRplus Part 1, found in the SFRplus section of the Documentation page. We recommend framing the chart with a small amount of white space above and below the top and bottom bars. Badly-framed charts can be analyzed with SFR using manual ROI selection.
